Week 9

Make installation component on the PCB board.

In week 9, I and my partner alif make the assembly and installation component on the PCB board.

The objective is to know how to put a component that has a polarity. We also need to know the result to be obtained and know how to install component on the PCB board.

Content/Procedure:

-  Make sure the component is in the proper place.

-  Component soldering as appropriate as there is some component that cannot be soldered too long.

-  Provide sufficient equipment prior to installation component on the PCB board.

-  Refer to the technician if there is a problem.

Results and analysis

- The circuit is done with soldering

- Can see the result if the circuit function

Figure 1: Before start soldering, we used black tape to make sure the omponent not drop during solder

Figure 2: After that, we solder the component with lead and carefully

Figure 4: Lastly, after make soldering, we used cutter to cut the component leg

Conclusion

-  Here we can learn how to install component on the PCB board, especially if there is polarity. We can also learn techniques for soldering in the right way. Furthermore, we can get the result of the function circuitry and analysis.